Author Topic: 1987  (Read 7835 times)

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
1987
« on: February 12, 2019, 03:51:16 PM »
Just found this forum so figured I'd post my put together.

This truck sort of fell into my lap. I wasn't really looking for a project but a guy at work needed to get rid of it and he even delivered it so here we are.

Trucks a 1987 Silverado package, all the fancy stuff. It's a long bed and the left side of the body has seen better days.

It's got a TBI 350 in it, it's supposed to run but haven't messed with yet. The trans is supposed to be bad but again haven't messed with it.

I bought a mexican short bed for it. Also grabbed a fender and a short bed tank.

As you can see it's gonna be quite a bit of work. I think the windshield sticker nails it.


Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #1 on: February 12, 2019, 03:52:15 PM »
And here's the bed. Not common, kinda ugly but it was cheap.

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2526
  • Old Goof
Re: 1987
« Reply #2 on: February 12, 2019, 04:05:41 PM »
Welcome from SoCal!

Looks like you're off to a good start.

I can't make out what the window sticker says...
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #3 on: February 12, 2019, 04:26:03 PM »
Welcome from SoCal!

Looks like you're off to a good start.

I can't make out what the window sticker says...

Thanks, it says will it make it haha

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #4 on: February 12, 2019, 04:26:55 PM »
So got the bed home and had to move it around.

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #5 on: February 12, 2019, 04:29:23 PM »
Then I had to remove the old bed and man was this a pain in the ass. I then moved the truck into a better spot so I could work on it. Check out that sweet original two tone.


Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #6 on: February 12, 2019, 04:31:13 PM »
Found some interesting stuff after removing the bed.

Can't weld up an exhaust? No problem!

Also who needs drop shackles? Custom.

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #7 on: February 12, 2019, 04:32:48 PM »
Grinded down some areas on the frame, welded on some stands to keep it in place, and cut it. No going back from here.

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #8 on: February 13, 2019, 12:33:30 PM »
Picked up a new trans for it

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #9 on: February 13, 2019, 12:37:30 PM »
Welded up the frame, don't mind the welds.

Welded in a plate as well before I welded the inside.

Ground down the outside and then boom, short wheel base.

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #10 on: February 13, 2019, 12:38:40 PM »
I couldn't even give the long bed away so I cut it up and made a bench out of it.

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #11 on: February 13, 2019, 12:39:44 PM »
And that's where I am now. I got the tank brackets mounted but need to get a new fuel sending unit, I must've damaged the connector when I removed the tank or something.

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 635
  • Euless, Texas
Re: 1987
« Reply #12 on: February 13, 2019, 01:31:41 PM »
Welcome to the site.
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2526
  • Old Goof
Re: 1987
« Reply #13 on: February 15, 2019, 02:37:30 PM »
Nice progress!

Keep them coming.
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline lownuff

  • Newbie
  • Posts: 28
  • @lownuff
Re: 1987
« Reply #14 on: February 18, 2019, 09:50:52 AM »
Well, I got the bed on.



Then I wrapped up the wiring on the taillights, put fluid in the trans and decided to take it on a test drive.

I made it as far as my other driveway and the front u joint blew up.




Up next is replacing the front fender and start doing some bodywork.