Author Topic: 1984 1/2 ton pick up with 6.2L engine  (Read 2811 times)

Offline cheryldbob

  • New Users
  • Posts: 1
  • Newbie
1984 1/2 ton pick up with 6.2L engine
« on: October 03, 2014, 10:36:28 AM »
 I am wanting to change all the belts on this 6.2L engine from factory to a single serpentine or combination serpentine and "V". As anyone familiar with this set up knows the alternator and A/C belts are constantly stretching and vibrating at low RPM. Maybe there is a conversion kit available or even a supplier of additional idler pulleys or tensioners.   

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18351
    • http://www.73-87chevytrucks.com
Re: 1984 1/2 ton pick up with 6.2L engine
« Reply #1 on: October 09, 2014, 08:03:51 PM »
The later model 6.5L's are all that had the serpentine setup, the components swapped around a little.  Not sure what you are asking on the other part.

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: 1984 1/2 ton pick up with 6.2L engine
« Reply #2 on: November 04, 2014, 11:49:25 PM »
wish i would of seen this a couple weeks ago. i had a 6.5 that was locked up would of gave you all the front parts but she went to the junkyard to clean up a little around the yard :(
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes