TODAY is a Great Day to visit our Store and order the parts you need for your truck!
I built my own lift blocks out of 1/4 inch steel plate, they are only 1 inch blocks tho, I was just getting a little extra height out of the rear. Plus the springs and bolts were all brand new.
That's sketchy! I agree lift springs, with shorty blocks if need be.
Quote from: Blazin on August 18, 2016, 07:34:45 AMThat's sketchy! I agree lift springs, with shorty blocks if need be.was behind a Ford today, he was lifted probably 8", and obviously had a 4" block, as one came out, I hit it-it went flying into the woods., but it was probably the worst thing I have seen as when the bed came down it punctured the tire, which caused it pop; making for an even worse situation. he was lucky the u bolts at least held or that could have been the last of that truck. I absolutely will not put anything over 1-1.5 inches as a block-as it is too much leverage for U-bolts-a zero-rate is the best as it is tied directly to the spring pack.