73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Suburbans => Topic started by: paintinx on September 18, 2016, 03:23:25 PM
-
today we changed a few hoses
and also the generator and the waterpump.
look at the picture, we couldNt finish the work
because we need two parts of the old waterpump.
but we couldn get it - both parts ar very tight to the old waterpump.
we have tried to burn it - to use caramba rost"entferner" and so on, no success. it is tight. for ever.
so we decided to buy some fitting parts in germany, but we need a few infos.
1st: the plug - it is there to close the way out - i have tried to measure it - but i am
not sure if it is a normal / common value in europe - it is about 18mm inside.
metric or inch??? ca Nt get the info,
because the old plug is still in the old waterpump.
do you know the exact description for the part and the measures?
2nd: the adapter for my hose - it is also about 18mm inside.
i also need the exact description and the measures (of the thread)
would be great if u could help me.
thx in advance, stephan
ps: mistake in the picture, the measure is 18mm, not cm!
-
LOOK AT THE PICTURE :)
-
Most auto parts stores sell replacement heater hose barbs and pipe plugs.