I've got the new rear end 95% installed. I'm having an issue with the driver side lower shock mounting ears. The one side got bent in somehow from the previous owner and the bend is right above the hole for the bolt, making it not so simple as banging it straight with a hammer. That just bends the end of the ear out but not where the kink is. Is there some kind of spreader type tool out there I could use? Something I could put in between the ears, then crank on it and bend it straight?
I tried using my bench vise by getting it in there and spreading it open but that just busted the cheap little C clip that retains the one jaw of the vise and made it useless now