« previous next »
Pages: [1]   Go Down

Author Topic: axle codes to rear end ratio?  (Read 14097 times)

Offline fbody

  • Newbie
  • Posts: 34
    • firebird and camaro
axle codes to rear end ratio?
« on: April 22, 2010, 02:24:36 PM »
anyone have a link to axle codes.. i know it is stamped on the tube, but where is the link that shows the code and then what rear end ratio that is?  thanks
Logged

Offline fbody

  • Newbie
  • Posts: 34
    • firebird and camaro
Re: axle codes to rear end ratio?
« Reply #1 on: April 22, 2010, 02:35:53 PM »
side note, i did look at 73-87.com, those rpo codes do not go as far back as 73.

mine, 73 C20, 3/4 ton, 454.  14 bolt.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: axle codes to rear end ratio?
« Reply #2 on: April 22, 2010, 06:56:07 PM »
Your only way to know for sure is to take the cover off and look what is stamped on the ring gear.  37 years have gone by and someone might have changed it out.  My $.02
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: axle codes to rear end ratio?
« Reply #3 on: April 22, 2010, 07:48:39 PM »
probably need to change the oil anyway. Ive pulled the cover on 3 of them in the last day or so, and they all showed cruddy oil with signs or water. (Milky)
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19010
Re: axle codes to rear end ratio?
« Reply #4 on: April 22, 2010, 10:22:49 PM »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline fbody

  • Newbie
  • Posts: 34
    • firebird and camaro
Re: axle codes to rear end ratio?
« Reply #5 on: April 22, 2010, 11:13:32 PM »
true on the oil change.  yea, i was scraping all sides of the axle tubes looking or stamped number.. nothing!  oh well, will pull cover and check there.
Logged

Offline fbody

  • Newbie
  • Posts: 34
    • firebird and camaro
Re: axle codes to rear end ratio?
« Reply #6 on: May 03, 2010, 08:44:43 PM »
found it.  code FD.. now I cannot find a link with that code on it.  anyone have any ideas or a book?
Logged

Offline fbody

  • Newbie
  • Posts: 34
    • firebird and camaro
Re: axle codes to rear end ratio? TFD in a 14 bolt
« Reply #7 on: May 03, 2010, 11:21:04 PM »
well shoot, i scraped off more junk.. code is actually TFD
Logged

Offline The Lady In Red

  • Newbie
  • Posts: 20
Re: axle codes to rear end ratio?
« Reply #8 on: May 04, 2010, 09:55:14 PM »
Quote from: zieg85 on April 22, 2010, 06:56:07 PM
Your only way to know for sure is to take the cover off and look what is stamped on the ring gear.  37 years have gone by and someone might have changed it out.  My $.02


Zieg is right... only way to know for sure.  However FYI, these are the codes available for your truck in '73:

3.21  (OPT HC8)
3.23  (OPT GU5)
3.42  (OPT GU6)
3.73  (OPT GT4)
4.10  (OPT GT5)

Logged
Pages: [1]   Go Up
« previous next »