rear end help. 73-87 88-99 99-06 widths

[stretch86]

Weare is a hike for me im in the south west corner of nh near vt and mass

[stretch86]

I checked out a rear end outta a 2000 4x4 1500 and overall width with tires is 75" but was more beat up then mine. I did however find one thatll bolt up. Its a 14b ff outta a 4x4 and hes asking 180. Only thing is hes lil over hour away

[fitz]

Come to Mass and I will give you a 10 bolt/6 lug rear end.

[stretch86]

where in mass and im assuming its prob a 88-98

[fitz]

30 minutes south of Boston.
Your right about the years. Its from a 91 full size Blazer.

[stretch86]

Thatd bolt right up though to bad your 2.5 hours away though

[fitz]

Thank you anyway for letting me offer to help.

[stretch86]

Did the 73-87 14bsf have 6 lugs or just 8. Cause i know the 88-98 models do but couldnt fjnd anything on these

[Jason S]

Did the 73-87 14bsf have 6 lugs or just 8. Cause i know the 88-98 models do but couldnt fjnd anything on these

Semi-float 14 bolts are 8 lug and were under 80's model 3/4 tons. 

Are you looking for something specific or just anything that will fit? 

That was a very generous offer from Fitz. I'd be inclined to spend the drive time versus searching through salvage yards and advertisements.

[stretch86]

I plan on tebuilding truck as i go and might build a 454 with a mild cam and dont know how long a 10b would up. My plan is to make a show/towing truck outta it

[stretch86]

Only reason i was asking abot the lug pattern is cause i know the 88-98 style have either 6 or 8 lug 14sf and i can get 6 lug conversion rotors for my c10. Unless i find a 454ss rear end cause thats a 14bsf with 5x5 pattern but seeings how rare those are i dont see it happening