73-87 Chevy _ GMC Trucks > Exhaust

81 K10 Headers

(1/2) > >>

Mike81K10:
Any recommendations for a good set of headers that would fit an 81 K10. I'm concerned that if I buy a set, they my not clear the clutch linkage and other areas. I have A/C, Compressor on Driver Side and it is a standard transmission.

Captkaos:
I don't have any recommendations on 4x4 stick shift applications unfortunately.  The Clutch and AC historically kept me sticking with manifolds, not to mention headers are thin and I wheeled mine in mud alot.

JohnnyPopper:
I would think the manufacturer would/should specify if they fit.

I can see the clutch question but don't get the A/C. My '78 has the same, compressor rides high enough that it should clear-I think... ::)

Think 'ball peen' as the final solution.

Swampyankee74:
Not sure if this helps but I used hedmen 69088 on my 74 c15 non ac truck. Had zero problems with the stock clutch linkage. Not sure if your truck and mine have the same linkage. But might be helpful info for you.

Mike81K10:
Thanks for the feedback, I think I will find a local supplier and get one from them, then if it does not fit - take it back for a refund or trade.

Navigation

[0] Message Index

[#] Next page