I have a 74 c10 and I changed the shift shaft seal , I had to pull out the shifter to get it out because I stripped the seal with the tool that I bought to pull it out with, well I got it all back together and now it won’t go into gear so I dropped the pan again and made sure everything was back the way it’s supposed to be and it was , well before I put the pan back on I wanna make sure that I there isn’t another cause that could be addressed before I install the pan back on , can someone please advise me to check other possible problems, and also my accumulator cover is leaking I’m going to change the o-ring before I put the pan back on , I’m not very good at mechanics but you tube videos sure help
Sent from my iPhone using Tapatalk