73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: jimishortbed on February 23, 2019, 08:44:35 PM
-
My truck is a '82 gmc sierra. I need to replace both outter rockers, one inner rocker, and one floorpan.
I also need to fix a place under the seat. It' the panel to replace this rusted floor section that I can't seem to find.
I see the entire cab floor, but the drivers side on my truck is rust free. The place under the is small and on the passenger side. I guess I can make a panel to fix it but a Pre-fab panel sure would make it easier.
I don't even know what to call the panel I'm looking for.
-
im trying to oost a picture
-
I’m sure someone on here will be able to help more, but when I replaced my floor, both sides were rusted and I bought the whole floor panel. I don’t remember seeing just part. Good luck.
-
im just going to make the panel myself.
thanks for the reply Ed4all10.
-
Look in the store on this forum. Up at the top towards the left is a button for the store.
-
I cut the rust out.
-
I cut out the rust
-
I cut the under seat panel and floor pan I needed from a donor truck