Registration and Posting Agreement
I might agree with painting the needles being a bad idea except for the fact that my volt, oil, temp, and speed are still accurate. Plus I have left the cover off the gauges and no matter where I try to move the fuel needle by hand it always goes back to where it wants. The old paint seemed thicker and heavier then the Testors paint I used, and I cleaned off the old sun burnt paint carefully before I painted. As I said the truck didn't move while I did this and pulling the gauges and re installing was all I did. Still trying to figure this one out...
Look in the Technical Section of this site:http://forum.73-87chevytrucks.com/smforum/index.php/topic,11766.0.html