73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: topside on December 11, 2008, 10:38:15 am
-
Trying to get an idea of how much of my '79 K10 floor I need to save, and how much of my '83 C10 floor I don't need to clean up, for teh eventual swap in the Spring. Anyone have 4x4 floor pics they can post? I'd appreciate seeing them, thanks.
-
this might help you out i know these are not the best pics but they might help if you need more let me know and i will take a few
(http://i222.photobucket.com/albums/dd224/74chevy/103_0870.jpg)
(http://i222.photobucket.com/albums/dd224/74chevy/103_0734.jpg)
-
Thanks, man, that helps! I didn't see anything when I did a search, but knew there had to be something posted.
-
any time
-
Here is some of a floor I redid a few years ago.
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/003Floorrepair.jpg)
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/004Floorrepairrockersuportin.jpg)
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/005Floorrepairbottomofnewfloorpan.jpg)
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/006Floorrepairtopofnewfloorpan.jpg)
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/007Floorrepairnewfloorpanscreweddow.jpg)
(http://i136.photobucket.com/albums/q165/BlazinK30/Chevy%20floor%20rocker%20cab%20corner%20replace/008Floorrepairnewfloorpanscreweddow.jpg)
-
Trying to get an idea of how much of my '79 K10 floor I need to save, and how much of my '83 C10 floor I don't need to clean up, for teh eventual swap in the Spring. Anyone have 4x4 floor pics they can post? I'd appreciate seeing them, thanks.
Heres a pic of the under seat 4X4 hump. This piece was cut from a 4X4 cab floor and used to convert a 2WD cab to 4X4, it's part one in the hole you need to cut in the 2WD cab floor. It is installed from underneth and bolted/screwed to the floor and the transmission hump bolts in last from the top.
(http://i173.photobucket.com/albums/w77/Joesgarage71/Parts/4X4floor.jpg)
This is the hole that was cut in Old Rusty's cab. I'm replacing the cab so I will do the same thing to the new 2 WD cab(I could weld it in, But its only a mudd truck)
(http://i173.photobucket.com/albums/w77/Joesgarage71/Parts/Cabfloor2.jpg)