73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: hotrod24 on December 22, 2008, 09:23:18 pm

Title: brake booster
Post by: hotrod24 on December 22, 2008, 09:23:18 pm

hey i will be taking my brake booster and other parts off and i was wanting know what i could use other then them plastic plugs like from eastwood until i can get some so dirt does not get in there

Title: Re: brake booster
Post by: VileZambonie on December 23, 2008, 07:01:30 am

Just leave the check valve in there.

Title: Re: brake booster
Post by: hotrod24 on December 23, 2008, 12:22:42 pm

ok thanks vile about the master cylinder and how big is the holes i think i could use some bolts

Title: Re: brake booster
Post by: hotrod24 on December 23, 2008, 05:25:31 pm

how big is the holes i think i could use some bolts

Title: Re: brake booster
Post by: VileZambonie on December 23, 2008, 09:34:37 pm

What are you talking about? Where your lines connect to the master? Just thread in another line.

Title: Re: brake booster
Post by: hotrod24 on December 23, 2008, 11:56:40 pm

i just wanted to unbuilt the brake lines from the master and then put something in the holes so dirt want get in there. like this

http://www.eastwoodco.com/jump.jsp?itemID=1298&itemType=PRODUCT

Title: Re: brake booster
Post by: Lt.Del on December 24, 2008, 01:46:28 am

Duct Tape

(http://www.delbridge.net/santac.gif)

Title: Re: brake booster
Post by: VileZambonie on December 24, 2008, 07:19:20 am

Just thread another line into the hole.

Title: Re: brake booster
Post by: 69byrd on December 24, 2008, 07:56:24 am

When I had the brake lines off my truck I used tape it worked fine never got any dirt in there.

Title: Re: brake booster
Post by: frogman68 on December 24, 2008, 08:00:43 am

why not a hardware store get some (I think its the size) 3/16 tube plugs they will screw in..