73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Steering Columns => Topic started by: 1badazz84 on January 11, 2009, 02:40:59 pm

Title: easy way to install turn signal switch
Post by: 1badazz84 on January 11, 2009, 02:40:59 pm

What's the easy way to install a turn signal switch by taking the column apart or is there a easy way to do it.

Title: Re: easy way to install turn signal switch
Post by: jefferias on January 11, 2009, 03:43:30 pm

haha  i tried to do mine and just got agitated and broke some stuff.  got a whole column from a wrecker for $20 and just replaced whole unit!  that was easier to me most defnitely

Title: Re: easy way to install turn signal switch
Post by: VileZambonie on January 11, 2009, 06:41:37 pm

yes it's easy if that's what you were asking. Remove the wheel, the lockplate, hazard button, signal stalk, canceling cam, 3 screws, and the connector. It might be easier if you loosen the column a little bit but it isn't necessary. Tie some mechanics wire around the connector and snake it out. Wrap the mechanics wire around the new one and put it in.

Title: Re: easy way to install turn signal switch
Post by: 1badazz84 on January 16, 2009, 07:17:13 pm

thanks for the heads up i think i could do it without getting  >:(.