73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: Ghazi67 on January 29, 2009, 12:18:18 pm

Title: Is it a 350 ?
Post by: Ghazi67 on January 29, 2009, 12:18:18 pm

Hello ..

I am working on an 83 K10 stepside ... the previous owner says it has a recently rebuild 350 ..
the engine number is ( M07020VP )

Can anyone help me w/decoding it .. Is it a real 350 ?

Thanks in advance

Title: Re: Is it a 350 ?
Post by: Captkaos on January 29, 2009, 12:58:15 pm

If you had the engine stamp it would be easier to look up.

Title: Re: Is it a 350 ?
Post by: joesgarage71 on January 29, 2009, 02:45:44 pm

 It reads like a stamp code
M=Mexico
07=July
02= the day
Not sure on the OVP don't have any newer suffix info.

Did you get these numbers from the right front of the block?

Title: Re: Is it a 350 ?
Post by: VileZambonie on January 29, 2009, 06:00:16 pm

What's the # on the back of the block near the bellhousing?

Title: Re: Is it a 350 ?
Post by: 85MudMonster on January 29, 2009, 07:25:51 pm

I can't find OVP.

Title: Re: Is it a 350 ?
Post by: Ghazi67 on January 30, 2009, 08:36:23 am

Captkaos, joesgarage71, VileZambonie, 85MudMonster ..

Thanks for the your replys ..

Captkaos ..
this is the only number I had access to @ this point since the engine in in the car

joesgarage71 ..
Thanks for the tip. Like you I am having a trouble tracing OVP

VileZambonie ..
I will let U know ...

Guys ... any site that would help in this is appreciated

Thanks again

Title: Re: Is it a 350 ?
Post by: Ghazi67 on January 30, 2009, 09:26:15 am

I am Back ..

Here is the Block Casting # ( 10066036 ) .. I hope I got it right

Does it ring a bell  ???

Title: Re: Is it a 350 ?
Post by: VileZambonie on January 30, 2009, 09:39:01 am

That's a GM crate engine 350

Title: Re: Is it a 350 ?
Post by: Russ130 on January 30, 2009, 09:41:01 am

it is a gm goodwrench crate 350 with 2 or 4 bolt mains made in mexico

Title: Re: Is it a 350 ?
Post by: Ghazi67 on January 30, 2009, 09:45:22 am

VileZambonie .. Russ130 ..

Thanks guys for the info ... 

Glad to have U around ..

All the best