73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Seats and Restraints => Topic started by: Jay2D2 on January 30, 2009, 02:36:03 pm

Title: Z24 Seats
Post by: Jay2D2 on January 30, 2009, 02:36:03 pm

Anyone ever try seats out of a Z24 cavalier.. lates 80s style?

Only asking cause I have a nice set and always found them comfortable

Title: Re: Z24 Seats
Post by: 69byrd on January 30, 2009, 11:07:12 pm

I had a set in an s-10 they are a real comfortable. I think it would be a good swap.

Title: Re: Z24 Seats
Post by: Dragon on February 03, 2009, 01:03:08 pm

Trying to install them using the stock Cav rails would probably give you a more challenging install, as a Cav has a fairly flat floor since it is a FWD....  You would probably need to fabricate some adapter brackets to use the Cav rails on a Pickup/Crew, but maybe not for a Blazer/some Burbs...   Now with that said, you might be able to get away with redrilling the seat frame mounts, if you were going to use 73-91 Truck rails(Some non truck Buckets will bolt directly to the truck rails no mods needed)...

Title: Re: Z24 Seats
Post by: 80stepsideguy on February 03, 2009, 01:53:14 pm

I`m using a set from a beretta GTU/GTZ/Z26 but they too got the rails from the floors and i would have to notch the floor in the center for the seat adjustment.I`m gonna fabricate some brackets that`ll bolt to the frame of the seats from a set of buckets i bought off of ebay from a 77-79 truck and they`ll bolt right to the floor.Plus i think summit or jegs sells aftermarket seat brackets so you can bolt your seat to them.IIRC.

thanks
pat