73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: nikesb1111 on February 15, 2009, 07:20:51 pm

Title: tranny cooler lines
Post by: nikesb1111 on February 15, 2009, 07:20:51 pm

Does the top tranny line go to the top or bottom of the radiator on an 86 k10 with a 700r4?

Title: Re: tranny cooler lines
Post by: Captkaos on February 15, 2009, 10:38:30 pm

This question is a little confusing...  The bottom one won't be long enough to reach the top line without bending it??

Title: Re: tranny cooler lines
Post by: nikesb1111 on February 15, 2009, 11:41:17 pm

Well im making my own lines and i forgot which ones go where. What im asking is if i start out with the top line on the transmission, where would that connect to on the radiator?

Title: Re: tranny cooler lines
Post by: eventhorizon66 on February 16, 2009, 11:58:20 am

I doubt that it matters which way you hook up the lines.

Title: Re: tranny cooler lines
Post by: Captkaos on February 16, 2009, 12:22:51 pm

Top connector is the return on the 700, bottom is the feed.  If you aren't running a external cooler, it really doesn't matter, but normally the bottom goes to the top of the rad and vice versa.