73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: bbs80 on February 18, 2009, 03:54:04 pm
-
I want to put dual tanks on mt 80 sw and look like it came from the factory with duals i have both tanks but nothing else can anybody tell me what else is need any where to get it.
-
first off do you have a dual bed? you will need to cut a hole in your dash and you can get the switch and harness and pump and wiring from a junk yard
-
The tank switching valve, switch, appropriate wiring, and hoses
-
the bed is set up for dual tanks, does anybody sell everything new to convert i really don't want to buy used because my luck i will end up replacing everything anyway.
-
You can get a switching valve, switch and hoses from autozone. The fuel tank filler pipes aren't available anywhere that I know of.
-
i have the filler neck and that stuff nothing else i want turn turn my single tank to duals I'm putting in my big block and I'm going to need more fuel so autozone sells everything else
-
what?
-
i have the filler pipe and hose for the tank, i need everything else to swap from side to side.
-
Has anyone ever put dual gauges for the dual tanks and did away with the switch in the dash?
-
Why? the gauge switches with the valve so you know what the level of both is?
-
i don't really know what i need i just want to add a 2 tank and switch it and the fuel Gage works
-
The tank switching valve, switch, appropriate wiring, and hoses
you need all that minus the hoses because you already have them....im not sure but you might be able to get that stuff out of
-
Why? the gauge switches with the valve so you know what the level of both is?
I was just thinking...what if?