73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: Irish_Alley on March 15, 2009, 01:35:46 am

Title: sm 465 np 203
Post by: Irish_Alley on March 15, 2009, 01:35:46 am

 i have a 465 and 203 now, on my t-case the drive shaft bolt to it by the u-joints and the 4 bolts. now my question is is that part on the t-case just a flange that can be swapped out just by taking the center bolt out and changing it over to a flange type setup?

Title: Re: sm 465 np 203
Post by: Blazin on March 15, 2009, 10:36:28 am

It can be if you can find a flat flange for a 203.

Title: Re: sm 465 np 203
Post by: fitz on March 16, 2009, 10:32:01 pm

 Try a local driveshaft shop. I'm doing this right now with my 205.

Title: Re: sm 465 np 203
Post by: fitz on March 22, 2009, 10:18:06 pm

These are the Spicer flanges I just picked up for my 205.

Title: Re: sm 465 np 203
Post by: joesgarage71 on March 23, 2009, 09:50:02 am

^ those would be Yokes he is looking for the flat flange, that used to be on your 205.
 Did you change to a larger joint for your 205 Fitz? I'm Looking for some 1350 stuff for my 205.
 Steve

Title: Re: sm 465 np 203
Post by: fitz on March 23, 2009, 03:48:03 pm

Quote from: joesgarage71 on March 23, 2009, 09:50:02 am

^ those would be Yokes he is looking for the flat flange, that used to be on your 205.
 Did you change to a larger joint for your 205 Fitz? I'm Looking for some 1350 stuff for my 205.
 Steve

What I meant was that you can still get the yokes,flanges, ujoint straps and so on brand new. My truck had a Rockwell Military spec transfer case in it. I'm swapping the flanges for yokes on my 205 to mate up with driveshafts that were on the Rockwell.   

Title: Re: sm 465 np 203
Post by: 1976Scottsdale on April 21, 2009, 08:17:45 pm

Oh yeah man, those flat flanges are a direct swap.  Done it several times to mine.  any other chev/gm 203 will work, i know the rears will swap from 203 to 205 also, fronts may be same.