73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: Chevalade on March 20, 2009, 02:36:58 pm

Title: Will the caltracs work with this setup?
Post by: Chevalade on March 20, 2009, 02:36:58 pm

Thinking of fitting poor man fatties on the back of my 81 2wd sb, by boxing the frame and swapping rear springs side to side on the inside,with a 3/4 drop. Would the caltracs also be able to swap sides and work on the inside of the frame?

Any thoughts on this would be appreciated.


Ryan

Title: Re: Will the caltracs work with this setup?
Post by: HAULIN IT on March 20, 2009, 03:50:40 pm

Sure, They are the same...just like a pair of socks! Be sure to get the correct ones (flip or non-flipped) based on where you put your axle (flipped ;)) Check with Chris...he is a distributor for Calvert products. Lorne

Title: Re: Will the caltracs work with this setup?
Post by: Chevalade on March 20, 2009, 04:43:23 pm

Thx Lorne. Wasn't sure if there would be angle or alignment issues doing it that way. Now this is the way to go prostreet on the cheap.


Ryan