73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: Laderhosen on March 29, 2009, 11:55:39 am

Title: Centre Caps
Post by: Laderhosen on March 29, 2009, 11:55:39 am

Anybody know if these'll fit the standard steels on an 82 3/4 ton???

http://cgi.ebay.co.uk/4-CHEVROLET-8-STUD-ORIGINAL-WHEEL-CAPS-WITH-LUG-CAPS_W0QQitemZ260383637010QQihZ016QQcategoryZ36631QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1262?_trksid=p1713.m153.l1262

Title: Re: Centre Caps
Post by: bmaier on March 29, 2009, 04:43:42 pm

Do you have a 2 or 4 wheel drive? If it's 4 wheel it wont fit unless you cut two of the centers out for the front and would also need different lug nuts.

As for whether or not it will fit the stock steels you would have to do some measuring. These center caps may hit that inner dish.

Title: Re: Centre Caps
Post by: choptop on March 29, 2009, 10:03:34 pm

You will have to get a set of nuts that have the outer thread on them that fit your wheel studs. I think they will fit then if its a 2wd.

Title: Re: Centre Caps
Post by: Laderhosen on March 30, 2009, 03:09:25 pm

YEah it's 2wd. Was just concerned they might not fit inside the dish.