73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Performance => Topic started by: Tezjoe84 on April 04, 2009, 06:07:43 pm

Title: Question about engine components.
Post by: Tezjoe84 on April 04, 2009, 06:07:43 pm

Hi guys,
  New guy here, and I browsed through your forums quite a bit the last few days,
I was curious if any has had any experiance with the Pro Comp engine components,
Heads, intakes, ignition systems etc... if they are good or not, pros and cons etc...
any info would be much appriciated.

Thanks,

Joe

Title: Re: Question about engine components.
Post by: choptop on April 04, 2009, 11:15:22 pm

Cant answer your question, but want to welcome you aboard.

Title: Re: Question about engine components.
Post by: Just-speed on April 06, 2009, 08:27:57 am

Welcome.    I used a set of Pro Comp lights one time does that count?........lol.   No really I have not used any of it. I think you will see most guys here use tried and true brands.     Always stick with tried and true.   

Title: Re: Question about engine components.
Post by: 78 Chevyrado on April 06, 2009, 11:45:36 am

No experience with pro comp, but welcome to the board and if you do buy their stuff, do a review for us!

Title: Re: Question about engine components.
Post by: Tezjoe84 on April 06, 2009, 01:20:42 pm

Quote from: 78 Chevyrado on April 06, 2009, 11:45:36 am

No experience with pro comp, but welcome to the board and if you do buy their stuff, do a review for us!

Yeah I was debating on trying out their heads and intake combo, i'm gonna do alot more research before ordering of course,
it will be 2-3 months before i'm ready to start buying parts, I still gotta get the other engine disassembled and taken to the
shop.

Title: Re: Question about engine components.
Post by: 82ChebySWB on April 08, 2009, 12:01:40 pm

My brother's used a polished Pro Comp intake on his 468 and had no issues. Most of thier stuff is a "copy" of an existing part. If you can get namebrand parts I'd try to stick with that....BUT, if you're on a budget then hey, save a few $$$.

Electrical components I'd definately stick with MSD,Mallory,etc.

Title: Re: Question about engine components.
Post by: Tezjoe84 on April 08, 2009, 02:28:38 pm

Yeah i've been looking for alot of feedback on their Heads... I was debating on trying them out. Still going to check into it alot more before commiting.