73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: Nick Magnum on April 25, 2009, 11:46:59 am

Title: door wiring hole location
Post by: Nick Magnum on April 25, 2009, 11:46:59 am

I added power window doors to my truck and they have the accordian rubber boot with the plate that rivets to the body. I need a location of where to drill the hole. Can anyone give me measurements from maybe the interior light pin to the rivet locations? thanks in advance, Nick

Title: Re: door wiring hole location
Post by: 78 Chevyrado on April 25, 2009, 08:29:04 pm

Look on the front end of the door and on the pillar in the general aren where it should go.  There will be 3 dimples, a center hole and the locations for the bolt holes.  I used the center dimple for my aftermarket looms.

Title: Re: door wiring hole location
Post by: fitz on April 26, 2009, 08:14:37 pm

It's 1.5" from the top of the dome light switch to the top of the boot. This pic isn't great but hopefully it helps.

Title: Re: door wiring hole location
Post by: Nick Magnum on April 28, 2009, 02:20:57 pm

thanks guys, that helped alot. power window time! got one door done, not I have to fab up a harness to the other side