73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: oldwhity on May 06, 2009, 08:37:56 pm
-
Is it possible to have warped drums? The other week I had the 85 up on the stands trying the hunt down a noise. I noticed when the truck was on the stands and the wheels were turning that the drums had a little wallup in them. I don't really notice it while driving though and the truck doesn't shake when applying the brakes.
-
I wouldn't think so. Has the truck ever fallen off of jack stands with no wheels on it and therefore landed on the drums?
-
the outer edge that you were watching isnt a true round circle. the machined part is inside where the shoe make contact. It sounds like u are ok. You can warp a drum though
-
the outer edge that you were watching isnt a true round circle. the machined part is inside where the shoe make contact. It sounds like u are ok. You can warp a drum though
This
-
I bought new drums from Autozone once and they were out of round. The rear brakes would grab odd, after a week or so I pulled the drums back off and found one of them to be out of round almost a 1/4"!
-
I wouldn't think so. Has the truck ever fallen off of jack stands with no wheels on it and therefore landed on the drums?
Not in the last month and a half that i've had the truck.
Thanks Dirt, Vile, and Blazin.