73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Performance => Topic started by: KoolerSL2 on May 25, 2009, 03:55:26 pm

Title: setting full roller rockers
Post by: KoolerSL2 on May 25, 2009, 03:55:26 pm

hey guys well my motor is in and running but i need to re adjust my roller rockers.
ive got over 4 different ways to set them and im trying to figure out which is correct.
now i have hardened push rods, studs and guide plates, and Summint Brand Full roller rockers ( natural finish ones ).
im used to doing the normal procedure of zero lash then 1/4 turn and your done.
ive heard all the way from zero lash and lock to 3/4 turn and lock em down.
can someone give me a lil bit of clarification?

chris

Title: Re: setting full roller rockers
Post by: VileZambonie on May 25, 2009, 05:45:57 pm

Zero lash plus 3/4 turn on TDCC is fine.

Title: Re: setting full roller rockers
Post by: KoolerSL2 on May 25, 2009, 09:42:49 pm

thanks for the clear up vile.
worked out great.