73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Power Windows & Door Locks => Topic started by: brlarl on June 05, 2009, 01:47:03 pm

Title: Billt Switches
Post by: brlarl on June 05, 2009, 01:47:03 pm

Does or has anyone ever wired an after market Power window and lock switch into the original wiring system without hacking the original wires and plug?.  I'm building my own custom door panels and want the somewhat hotrod look and want to use the aftermarket Billet switches.  Any ideas?  Thanks

Title: Re: Billt Switches
Post by: VileZambonie on June 05, 2009, 03:35:37 pm

Get a soldering iron and make a new connector pigtail. Make sure your switches are load carrying.

Title: Re: Billt Switches
Post by: Flamingbig10 on June 11, 2009, 01:57:37 am

I had 88-94 c/k power switches in my truck it was a simple swap, but I switched to manual windows and locks