73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: KoolerSL2 on July 11, 2009, 10:24:35 pm

Title: moisture in valve covers
Post by: KoolerSL2 on July 11, 2009, 10:24:35 pm

hey gents have a small question. when i did my intake swap i noticed small accumulation of moisture inside the valve covers. well i cleaned it out and had someone tell of it was because i wasnt running  a pcv setup. could this be true? and before anyone asks yes i checked all gaskets and water level and all is good there.

Title: Re: moisture in valve covers
Post by: Irish_Alley on July 11, 2009, 11:40:15 pm

the pcv makes sense but i run one and i have a noticed a little rust on the top side of the valve covers

Title: Re: moisture in valve covers
Post by: VileZambonie on July 12, 2009, 07:44:57 am

Yes, run a pcv system