73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: hotrod24 on July 25, 2009, 11:55:41 pm

Title: center hump
Post by: hotrod24 on July 25, 2009, 11:55:41 pm

ok well today i was looking at my truck and cab and i seen that the back hump had rivets in it and was tic welded down with filler and the front hump has been cut on now i know it did not come stock like this it had to be a 2wd drive cab before


(http://i222.photobucket.com/albums/dd224/74chevy/103_0906.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/103_0768.jpg)
 

Title: Re: center hump
Post by: Irish_Alley on July 26, 2009, 01:10:18 am

http://forum.73-87chevytrucks.com/smforum/index.php?topic=11838.0
this should help

Title: Re: center hump
Post by: hotrod24 on July 26, 2009, 05:35:05 pm

thanks i wish i could find some pics that would show the whole hump from 73-80

Title: Re: center hump
Post by: Skunksmash on July 27, 2009, 02:07:42 am

Off topic, but how can you tell if you have the low hump, or the high hump?

Title: Re: center hump
Post by: Irish_Alley on July 27, 2009, 03:46:14 am

go to that web page i posted and compair yours to it

Title: Re: center hump
Post by: hotrod24 on July 27, 2009, 04:46:17 pm

anybody that has a 4x4 hump like mine post your pics please

Title: Re: center hump
Post by: Captkaos on July 27, 2009, 04:58:28 pm

look at the yellow truck floor, it looks just like yours.

Title: Re: center hump
Post by: hotrod24 on July 27, 2009, 05:04:22 pm

yea chris you are right it does look like mine just a 2wd mine is just square and i think taller

Title: Re: center hump
Post by: hotrod24 on July 27, 2009, 07:00:44 pm

well i have bad news the sides of the hump is rusting under neath the floor i pulled some of the filler up and there it was rusting away and this means that i am going to have to cut the tic welds and drill out the rivets oh well i guess when i start cleaning up the rust before i take the cab off i will take it out also

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0401.jpg)

Title: Re: center hump
Post by: Skunksmash on July 28, 2009, 03:12:20 am

Quote from: Irish_Alley on July 27, 2009, 03:46:14 am

go to that web page i posted and compair yours to it

Dang, i guess it's too hard to tell with my carpet still on. Have to wait till I get it out i guess.

Title: Re: center hump
Post by: hotrod24 on July 28, 2009, 01:01:20 pm

yea when you take it out let me know :)

Title: Re: center hump
Post by: hotrod24 on July 29, 2009, 08:06:43 pm

well today i went out and worked on it a little and scaped off the seam sealer and i took some more pics it is a hack job

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0405.jpg)
                                      this where it is over laped
(http://i222.photobucket.com/albums/dd224/74chevy/SANY0417.jpg)
                                             same thing here
(http://i222.photobucket.com/albums/dd224/74chevy/SANY0414.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0413.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0416.jpg)
                            you can see where it has been welded here
(http://i222.photobucket.com/albums/dd224/74chevy/SANY0410.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0412.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0408.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0406.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0404.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0403.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0402.jpg)

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0409.jpg)