73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Members Rides => Topic started by: brandon81chevy on July 28, 2009, 06:01:49 am

Title: New project pullin truck
Post by: brandon81chevy on July 28, 2009, 06:01:49 am

 Me and the step dad decided to get the 84 k20 out of retirement and pull her. Big block truck .060 over 402 11:1 comp and a mild cam. Pull at the local fair the other day made 203' and change at 3500 rpm because of a screwed up throttle cable(which was brand new I miight add) still working the bugs out of the drivetrain and have to find a good body for her.

Title: Re: New project pullin truck
Post by: Irish_Alley on July 28, 2009, 06:05:32 am

my cable from autozone kept binding up "at the carb where the cable slides" on me then one day it was about to stall so i was ticked of and floored it broke the cable so i picked one up from advanced auto and the problem by putting a longer sleeve on the cable now it works just fine

Title: Re: New project pullin truck
Post by: Engineer on July 30, 2009, 08:29:00 pm

Have you checked out my threads?

I am currently in the tear down stage of rebuilding my '77 K-30 puller.

If you would like some advice on building a solid 4x4 truck puller just ask. I have been at for 15 years, and have gobs of trophys.  :)

(http://lh5.ggpht.com/_1X-zaEfNoAQ/Sl6MTpPo-EI/AAAAAAAAACY/-pLHQW3Uuf0/s512/Whitey%20Pullin.jpg)