73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Instrumentation => Topic started by: screamin86 on August 11, 2009, 01:18:01 am
-
well the po of my truck had rigged up a bunch of extra lights in the cab and had run them through the stereo wireing....well one day i was driving along and went to change the station on the radio and ended up moving it (not secured right either) and when i did all my factory gauges other than the speedo quit working! the next day the radio came out after it set fire to all the extra wires the po had ran to the added lights. now all i want to do is figure out if there is a fuse somewhere or is the damage worse? ive looked at all the fuses and everything looks fine. i do not like driving without having a working temp gauge and fuel gauge! i added a mech oil psi gauge and a tach so im good there but id like to get everything else working again. all the lights work just the gauges themselves dont. any helpd would be greatly apreciated!! thanks guys/gals
-
Check the fuse box for the gauge fuse.
-
Well can someone tell me where the gauge fuse is!? Lol i cant find it in the block
-
Anyone got any ideas? Im at a loss! Ive looked all through the fuse block and under dash and found nothing.
-
One my 85 it is labeled Gage/idle, a 20 amp fuse right on the box under the dash...
-
Ill have to look again when i leave work...do you remember about where on the block its located?
-
Around the middle left to right and about 4 rows up.
-
Yeah i feel like a idiot! Lol i found it. The one that may cars have just says gauges! Gage/idel threw me off. I got it fixed now! Thanks for the help!
-
Glad I could help