73-87chevytrucks.com

General Site Info => General Discussion => Topic started by: 87wrangler on August 19, 2009, 05:34:02 pm

Title: 1987 305 tbi stalls
Post by: 87wrangler on August 19, 2009, 05:34:02 pm

Hi, i bought my 87 wrangler a little over a month ago and sometimes when i start then start to drive without letting it warm up it will stall, this has only happened to me a few times and i am not to familiar with tbi everything else i own is carburated. andy help is appreciated. also i did run some fuel injector cleaner in it a while ago.

Title: Re: 1987 305 tbi stalls
Post by: Captkaos on August 19, 2009, 05:46:38 pm

What codes are you getting?

Title: Re: 1987 305 tbi stalls
Post by: 87wrangler on August 19, 2009, 06:25:57 pm

what do you mean by codes? dash lights?

Title: Re: 1987 305 tbi stalls
Post by: Blazin on August 19, 2009, 09:06:39 pm

The computer should be throughing up codes if it has running issues. The check engine light should be on, or coming on, and off?

Title: Re: 1987 305 tbi stalls
Post by: VileZambonie on August 19, 2009, 11:14:18 pm

Start with the basics and tune it up. Liquid medic won't fix it. You can retreive diagnostic trouble codes with a paper clip jumping the a&b terminals in the data link connector under the dash. It will flash the check engine light in a morse code. example flash pause flash flash of the check engine light is code 12. Report

Title: Re: 1987 305 tbi stalls
Post by: 87wrangler on August 21, 2009, 04:27:33 pm

thanks for the help guys.

Title: Re: 1987 305 tbi stalls
Post by: Captkaos on August 24, 2009, 06:09:40 pm

What did you find?