73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: aussie on September 12, 2009, 04:17:55 pm

Title: diveshaft lengths
Post by: aussie on September 12, 2009, 04:17:55 pm

anyone know how long the  driveshaft is on a long bed truck with a 700r4 trans i measured a th350 shaft i think it was the 9" long extension housing and its about 1/12 to short so if a 7004 is longer i hoping it will work on my 4l60e

Title: Re: diveshaft lengths
Post by: Captkaos on September 14, 2009, 04:25:16 pm

A 9" tail TH350 is the same basic length as a 700R4, so it should use the same driveshaft length.

Title: Re: diveshaft lengths
Post by: aussie on September 14, 2009, 07:22:12 pm

i see the shaft i measured was from a 85 truck with a 350

Title: Re: diveshaft lengths
Post by: oldredtruck on September 17, 2009, 10:00:38 pm

I swapped my TH350 for a 700R4 - same driveshaft... muy bueno...