73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: screamin86 on October 01, 2009, 12:37:49 pm

Title: seperating transmissoin and transfer case
Post by: screamin86 on October 01, 2009, 12:37:49 pm

alright i got my old motor out today and i picked up my new transmission nad transfer case. i found out that it is a 203 t case so im not gona use it and just sell it and i will bolt my 208 back up. now how do i do this? lol

Title: Re: seperating transmissoin and transfer case
Post by: Donut on October 03, 2009, 12:52:14 pm

Before you get rid of the 203, make sure the 208 is going to fit.  The adapters and bolt patterns MIGHT be different.
On my turbo 350/205 there was an adapter between the trans/transfer case.  On mine I think it was about 12 bolts (4 on the trans. side, 8 on the transfer case) on later models I believe bolt patterns changed.

I've got a turbo 400 sitting in my shed, wrong adapter and spline count to use with my current transfer case.