73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: k5blazerfan on November 09, 2009, 02:43:29 am

Title: door swap
Post by: k5blazerfan on November 09, 2009, 02:43:29 am

i have an 84 k5 blazer it cam with power windows and locks someone had cut the wires going to the door and put new doors with manual windows and locks i was wondering if someone had a wiring diagram for this or if someone new were the wires went under the dash and if they had a release on the harness any info would be greatly appreciated thank you

Title: Re: door swap
Post by: Blazin on November 09, 2009, 05:59:46 am

The wire run right to the fuse box and plug in. You can get the harness new , but I would find a donor truck at a salvage yard. Probably an hour or two job to install.

Title: Re: door swap
Post by: k5blazerfan on November 25, 2009, 01:22:47 pm

yeah i found 2 really good doors at the salvage yard with power windows and locks.. i also discovered you follow the wires from the door to under the dash theres a harness there that unplugs so you can plug in the new ones