73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: 327power on November 21, 2009, 09:22:20 pm

Title: Lots of Sanding.
Post by: 327power on November 21, 2009, 09:22:20 pm

Ok, so I have a horrible paintjob on my 1981 Custom Deluxe stepside. It was sprayed black over the original silver. The problem is the black is all coming off in big chunks. It seems that the silver underneath is shiny as if they painted right over everything without any preparation.
How can I remove the black paint without wiping out too much of the silver underneath? I want to strip off all the black paint so I can give it a proper respray without starting from scratch with bare metal. Thanks.

Title: Re: Lots of Sanding.
Post by: Chevalade on November 22, 2009, 02:43:48 am

DA sander is your best friend.

Title: Re: Lots of Sanding.
Post by: Blazin on November 24, 2009, 11:40:33 pm

 A good quality razor scraper and change the blade often will take allot of it off. Long slow even passes.

Title: Re: Lots of Sanding.
Post by: 80stepsideguy on November 25, 2009, 04:20:05 am

Take a roll of 2 inch tape, take a piece, put it on the panel and take your hand and rub it down good and pull the tape off and i bet alot will come off that piece you rubbed down...

thanks
pat

Title: Re: Lots of Sanding.
Post by: Blazin on November 25, 2009, 06:13:14 am

The tape thing works good too, just forgot about it!
 ;D

Title: Re: Lots of Sanding.
Post by: 327power on November 27, 2009, 12:32:10 am

Hmm...very interesting. I guess I gotta buy a like 15 rolls of tape, right? Duct tape?  ::)

Title: Re: Lots of Sanding.
Post by: 80stepsideguy on November 27, 2009, 12:56:57 am

you could get  what they call a sleeve from home depot for like 20 bucks..There are like 6 rolls in a sleeve.I would buy 1 roll 1st n try that method.If not then blazin`s method is good as well...

thanks
pat

Title: Re: Lots of Sanding.
Post by: Gearhead1 on November 27, 2009, 09:39:34 pm

High pressure washer?

Title: Re: Lots of Sanding.
Post by: 327power on November 28, 2009, 03:17:57 pm

Honestly, I don't know how well it's really on there. It's all flaking off at the edges of the panels. Looks like shoot. That high pressure wash idea sounds cooler than the tape idea! I'll give it a shot when I get back from Iraq in January sometime. Thanks!

Title: Re: Lots of Sanding.
Post by: 73micrys83 on November 28, 2009, 04:39:36 pm

Since you're over there in Iraq, THANK YOU! And Happy Thanksgiving!