73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: 82oldskid on December 17, 2009, 01:06:59 am

Title: 89 chevy 350 engine brackets & accessories on an 86
Post by: 82oldskid on December 17, 2009, 01:06:59 am

i want to convert my 86 K20 with a carbed 350 to have a serpentine accessory setup from an 89 chevy.  i got all the brackets, and accessories, and the tensioner, but i've got one small snag.  my 86 has different alternator than the 89.  in the long run, i want to rewire the truck with a painless wiring kit, but until then, i gotta make my wiring work.  but how do i do it?  on my 86, there are 2 wires going to the alternator, and only 1 on the 89.  any idea what i can do about this?

Title: Re: 89 chevy 350 engine brackets & accessories on an 86
Post by: beastie_3 on December 17, 2009, 01:08:39 pm

One wire goes straight to the battery.

Title: Re: 89 chevy 350 engine brackets & accessories on an 86
Post by: VileZambonie on December 17, 2009, 04:41:53 pm

Piece of cake. I did this on my 85. Google SI to CS conversion