73-87chevytrucks.com
General Site Info => Welcome => Topic started by: markiemark on January 03, 2010, 10:38:38 am
-
Hello all! I just stumbled on to this site! I'm a member of 2 others and am glad to have come across here. This is my 1st GMC pickup. It's an 83 short bed. It was primed already and lowered 5/5 with Western Chassis products! I've had it over 3 weeks and haven't really seen it. It went straight to my mechanic for some work. Over all it's in good condition. Drove it home 2 hours with no problems. I've already had installed Doetsch Tech shocks. The Magnaflow mufflers and pipes were brand new but were done terribly, so that's getting reworked. A little fine tuning, some polished valve covers, and a new filter up top and she'll be on her way home. Ordering some 18/20 rims and also guna start on the interior. Probably not going to extreme on it. Well here's a few pictures. More to come!!!!!
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10002.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10003.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10004.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10005.jpg)
-
Sweet! Welcome aboard...where in CT are you from? I'm in CT as well and truck looks good.
-
welcome to the site!
-
Sweet! Welcome aboard...where in CT are you from? I'm in CT as well and truck looks good.
Danbury!!!!!
-
welcome to the site!
Thanks!!!
-
I'm gonna need some help/suggestions. My rear bumper is sitting a little low. I think it was hit. Looking to replace it. Smoothie roll pan or just a new bumper. And the mirrors are too big! Can i just use existing holes and install car mirrors? I've seen a few done and it looks pretty good. I would love to go without mirrors but I don't know if I'll get a ticket. A lot more to come!! LOL
-
Those are actually my favorite mirrors but if you want smaller mirrors they made a factory small mirror too. I like roll pans myself but if you're out in Danbury you might wanna stick with a bumper. Is the bumper tweaked or it's just not sitting straight?
-
Welcome from NW Indiana
-
Welcome from Texas. Nice truck.
-
Those are actually my favorite mirrors but if you want smaller mirrors they made a factory small mirror too. I like roll pans myself but if you're out in Danbury you might wanna stick with a bumper. Is the bumper tweaked or it's just not sitting straight?
I'm not sure. I did notice a little dent just off the right center. I might just go smoothie and stick the rear plate somewhere... Can you direct me to where the smaller mirrors are? My other option was the same mirrors in black. has those!!!!
-
Good lookin truck. It resembles my GMC a little. Welcome from Maryland.
-
http://www.classicparts.com/1973-87-Outside-Mirror-Assembly-Reproduction-D49/productinfo/58-123/
(http://www.classicparts.com/images/58-123.jpg)
(http://image.hotrod.com/f/8925562+w750+st0/256large+1981_chevrolet_c10_short_box_stepside+front_right_view.jpg)
-
http://www.classicparts.com/1973-87-Outside-Mirror-Assembly-Reproduction-D49/productinfo/58-123/
(http://www.classicparts.com/images/58-123.jpg)
(http://image.hotrod.com/f/8925562+w750+st0/256large+1981_chevrolet_c10_short_box_stepside+front_right_view.jpg)
Awesome! Thanks....
-
I wish they made a mirror in between those two. Those are a little too large and the smaller ones are too small especially on the right side. I thought using a pair of rally mirrors from a Camero or Firebird, then you'd be able to adjust the r/h from the drivers side.... heated??
turn signal???
-
Oops, didn't mean to divert thread. I do like your truck, looks like you got a good start just by buying it. keep the pics of your progress coming.
-
Welcome from West Texas
-
Nice truck. My roll pan gets a lot of compliments and was cheaper than a bumper.
-
has the smaller mirrors too. Nice truck. My roll pan gets a lot of compliments and was cheaper than a bumper.
Who has the smaller mirrors too? And yes I went ahead today and ordered a steel smoothie from Mar-k. Great price too.....
-
I can get the small mirrors, but they are on backorder. They are $124.99 + shipping.
-
Welcome from Mass. Nice truck. Any motor pics?
-
Welcome from Illinois
-
Welcome from Mass. Nice truck. Any motor pics?
Thanks! No motor pictures. My mechanic is taking his sweet time but as soon as I get it back, I'll update some pictures!
-
Well Wednesday night it should be done and my rims should be arriving this week also. I'll post up some pictures!!!!
-
Cool
-
I received something in the mail today!!!!!!
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10011.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10012.jpg)
-
Nice! how big? 18's?
-
Nice! how big? 18's?
18x8 and 20x10
-
Got the rims on and the fender trim off. I need a small spacer to fit center cap up front but I like the turnout! Enjoy
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10013.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10016.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10015.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10019.jpg)
(http://i69.photobucket.com/albums/i56/kiddroptop/C10/83c10020.jpg)
-
Very nice! I really like those rims.
-
Looks sharp