73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: carson on January 12, 2010, 11:26:13 am
-
I want to be sure before I pull the trigger that this setup will work, so if someone will please double check me I would appreciate it.
1975 Blazer 4wd stock height. I will lift it a small amount if I have to. (Can you use blocks on the front?, or I've got the rear springs from a 1982 2wd halfton if that would be of any use)
Wheel, Soft 8, Steel, Black, 15 in. x 10 in., 6 x 5.5 in. Bolt Circle, 4 in. Backspace
Tire, Super Swamper LTB, LT 33.00 x 13.50-15, Bias Ply, 2,270 lbs. Maximum Load, Blackwall
Lug Nuts, Conical Seat, Bulge, 1/2 in. x 20 RH, Open End, Zinc Plated Steel
I'm new to the 4x4 scene, so any and all help is appreciated.
-
I want to be sure before I pull the trigger that this setup will work, so if someone will please double check me I would appreciate it.
1975 Blazer 4wd stock height. I will lift it a small amount if I have to. (Can you use blocks on the front?, or I've got the rear springs from a 1982 2wd halfton if that would be of any use)
Wheel, Soft 8, Steel, Black, 15 in. x 10 in., 6 x 5.5 in. Bolt Circle, 4 in. Backspace
Tire, Super Swamper LTB, LT 33.00 x 13.50-15, Bias Ply, 2,270 lbs. Maximum Load, Blackwall
Lug Nuts, Conical Seat, Bulge, 1/2 in. x 20 RH, Open End, Zinc Plated Steel
I'm new to the 4x4 scene, so any and all help is appreciated.
Not sure on most of it but NO blocks in on or near the front axle...
-
You might rub a little on the lock to lock with the 13.5' and 10" rims, but you may be ok.
-
yea no blocks in front please