73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: str8bloc on January 17, 2010, 09:26:41 am

Title: engine wires
Post by: str8bloc on January 17, 2010, 09:26:41 am

where do yall put the wires that come fm the firewall to the alt. mine is the stock location but as i see some of yalls pics its gone

Title: Re: engine wires
Post by: VileZambonie on January 17, 2010, 10:05:53 am

 ??? Not quite sure what you're asking

Title: Re: engine wires
Post by: str8bloc on January 17, 2010, 10:57:10 am

thwire that goes to the alt that runs across the intake on the left side i dont see it on some ppls pics but mines there and was wonderin where do yall put it

Title: Re: engine wires
Post by: VeeTwin60 on January 17, 2010, 01:45:36 pm

You can really put it wherever you want, as long as it isn't near the headers.  Put it in some protective wrapping/conduit, route it where it looks the neatest to you.

Title: Re: engine wires
Post by: eventhorizon66 on January 17, 2010, 02:12:57 pm

I did it the factory way and just put some fresh convoluted tubing on. http://www.summitracing.com/parts/TAY-38000/

Across the back of the engine, down the passenger side of the intake manifold toward the alternator, then down and around to the starter.