73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: Tater502 on January 25, 2010, 04:46:44 pm
-
Heres my 79 GMC Sierra Grande LWB 3/4 ton.
I'm swapping the 203 transfer case for a 241c out of a 90 blazer. The driveshaft yoke is bolted to the 203, the blazer driveshaft just slid into the rear of the 241. Any ideas on what I should do?
(http://i3.photobucket.com/albums/y83/rollins03/79%20gmc%20sierra%20grande/DSC03788.jpg)
-
Got both driveshafts? Cut the end of both and swap the new one onto the old shaft compensating for any length differences.
-
The front shaft out of the donor will work. the rear shaft from another long bed truck will work or a suburban might work depending on your lift.
-
Chevalade, I have both shafts from the blazer. That might work, but I think theres a big difference in diameter between them. Would it still be doable?
VileZambonie The lift is 4" suspension and 2 " body, what the previous owner told me. What year of truck would I be looking for, anything with a 208 or 241 transfer case?
-
You got it.