73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: k5blazerfan on February 04, 2010, 01:52:06 am

Title: wonderin if i could put a hydraulic clutch in my truck
Post by: k5blazerfan on February 04, 2010, 01:52:06 am

i got an 84 blazer with a non hydraulic clutch and i want to put in a hydraulic clutch...could any hydraulics of any other chevy truck fit?

Title: Re: wonderin if i could put a hydraulic clutch in my truck
Post by: Blazin on February 04, 2010, 05:48:09 am

Allot of effort for nothing gained I would say. It can be done pretty easily. Would have to take the bell housing, slave cylinder, line, reservoir, master cylinder / rod assembly, and pedal from a C/K with a juice clutch.

Title: Re: wonderin if i could put a hydraulic clutch in my truck
Post by: frito-bandito on February 04, 2010, 07:34:55 am

if you put a hydraulic clutch in your truck, it would make it easier and cheaper to do a NV4500 (5 spd OD) swap in the future if so desired.

Title: Re: wonderin if i could put a hydraulic clutch in my truck
Post by: k5blazerfan on February 04, 2010, 10:58:28 pm

thanks blazin and emc im thinking of a hydraulic clutch because i would like to someday soon put in an nv 4500 5 speed cause the gas mileage would improve... that and my non hydraulic clutch is really really springy itll knock you out of your chair of you aint caerful lol

Title: Re: wonderin if i could put a hydraulic clutch in my truck
Post by: Captkaos on February 05, 2010, 08:20:54 am

Springy as in stiff?  if so that is probably because it has a 3 finger clutch in it.  If you change to a diaphram it will be much easier.