73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: BOCEPHUS on February 04, 2010, 01:03:02 pm

Title: UPPER CONTROL ARM STUDS
Post by: BOCEPHUS on February 04, 2010, 01:03:02 pm

I need the upper control arm studs. The stud or bracket holds the control arm to the frame. these press in.
I found a photo here on the site.

I ordered these from   but they are not correct, and I have called every were yearone paddock parts stores etc.
can not find them.

so I need to know  were I can get them.
Thanks for any help
 

Title: Re: UPPER CONTROL ARM STUDS
Post by: Captkaos on February 04, 2010, 01:58:12 pm

Your are trying to hard to find them, call your local parts store or call an alignment shop and ask them were to get them.  I think I got some for one of those crossmembers you posted that I chopped from NAPA.

Title: Re: UPPER CONTROL ARM STUDS
Post by: BOCEPHUS on February 04, 2010, 05:29:12 pm

Found them at Classic Parts of America
and these are correct.

ITEM#                DESCRIPTION                            QTY    TOTAL   
---------------------------------------------------------------------------
74-372              (1963-91)  Control Arm Shaft Bolt-Upper4

GM dealers can't get them, Part stores can't get them , alignment shop could not get them.
I was on the phone today looking for these for 4 hours.

  truck has them on the site but don't buy them cause they want work.

thanks any ways Captkaos
I ordered these today

Title: Re: UPPER CONTROL ARM STUDS
Post by: Captkaos on February 05, 2010, 10:58:44 am

That should be them.