73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: krafty33 on February 20, 2010, 01:13:59 pm

Title: Stock rear driveshaft length
Post by: krafty33 on February 20, 2010, 01:13:59 pm

What is it for a 76 K10 LB, 350 trans, and a NP203. I am looking for the measurement center to center on the joints. If possible, both that collapsed and extended measurements with the slip.

Title: Re: Stock rear driveshaft length
Post by: Tater502 on February 21, 2010, 09:25:27 am

Mine is 58" long from center of each u joint. 79 GMC 3/4 ton lwb, 4" suspension lift, turbo 350/203. I measured it when the truck was sitting in my driveway.