73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: treestandjunkie on March 08, 2010, 05:13:51 pm

Title: 87 chevy front drive shaft
Post by: treestandjunkie on March 08, 2010, 05:13:51 pm

I need to know where to get parts to rebuild front drve shaft on my 87 k-10. the transfer case is np 205. The shaft has been sitting but is not froze up. Thanks

Title: Re: 87 chevy front drive shaft
Post by: VileZambonie on March 08, 2010, 05:18:08 pm

Any auto parts store should have what you need. Try searching on here also there's posts on where to buy the slip collar too if you need it.

Title: Re: 87 chevy front drive shaft
Post by: fitz on March 08, 2010, 11:18:28 pm

 Did someone swap in the 205? I've never seen a factory installed 205 in an 87 1/2 ton. It wouldn't be the first time I've been wrong, just don't want to see you order the wrong parts.

Title: Re: 87 chevy front drive shaft
Post by: Irish_Alley on March 09, 2010, 12:20:22 am

i think thats all they came with, but im the same as you fitz i can be wrong

Title: Re: 87 chevy front drive shaft
Post by: Blazin on March 09, 2010, 05:59:22 am

87 1/2, and 3/4 ton would have had a NP 208 original. Only 1 tons got 205s.

Title: Re: 87 chevy front drive shaft
Post by: treestandjunkie on March 09, 2010, 05:58:02 pm

My 87 was a 2 wheel drive converted to 4 wd with 82 K-5 blazer parts.