73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Nathan2424 on March 13, 2010, 11:22:15 pm
-
If anyone has these im in desperate need for them, im swapping my 700r4 and np208 to sm465 np208 in a 1984 chevy k10 and i have all the parts im am just unsure where to mount the z bar to frame mount. My bellhousing has the stud i threaded into it instead of the block. If anyone knows please try to explain it to me or post some pics. . . :-\
-
Anyone?
-
Haven't got any pics. The frame should have the holes for the bracket that holds the bar.
-
when i get home today ill try to take a pic to help you out
-
Thank you ;D
-
Nathan, I have the same setup. As Blazin said above, "The holes are on the frame rail" about 8" to the right towards the cab, beside the shock. here are some pics.
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear276.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear277.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear278.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear279.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear282.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear283.jpg)
(http://i354.photobucket.com/albums/r436/KYRob1970/85RunningGear280.jpg)
-
I think that should have read 8" to the right of the shock, towards the cab
Rob..
-
Picture from the top:
(http://www.captkaoscustoms.com/images/clutchbrkt.jpg)
-
thanks capt computer was down last night so i couldn't post them then sorry bout that
-
Thank you so much!