73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: chadt256 on March 22, 2010, 09:08:48 pm

Title: 78 chevrolet linkage issue after lowering tranfer case
Post by: chadt256 on March 22, 2010, 09:08:48 pm

alright.. i lowered my t-case an inch so the front d-shaft would hook up ... after doing so my drive and reverse and park linkage will not engage it just makes a small grinding sound... any ideas welcome?

Installed 6 inch suspension thats why im having to lower t-case..

Title: Re: 78 chevrolet linkage issue after lowering tranfer case
Post by: Blazin on March 22, 2010, 11:23:56 pm

Loosen the jamb bolt on your shift linkage. Put the trans in park, and the shifter in park. Tighten it, from there you might need to tweak it a bit, but this gives you a start point!