73-87chevytrucks.com
General Site Info => Welcome => Topic started by: 747guy on July 03, 2010, 03:31:40 am
-
Hi to All,
Well here we go, I have started this build using an 1985 5/4 ton M1008 cucv Chassis and the springs and 4:56 axles that came with it, and thats all that will be used from the military truck. the frame and springs and axles have been sandblasted, etched, epoxy primmered and Imeron topcoated (New England proof). the cab and bed are from a C-10 Arizona rust free truck (also 85). My first issue I am looking for info on is the brake system. I have converted the rear to disc using the 79 Eldorado calipers with park brake. and I am planning on using the Vac boost and master cyl from one of my K-20's origally the cucv used the hydro-boosetd brake system, will the vaccum sys from the K-20 work ok with the massive calipers on the Dana -60 front? or should I start looking for a hydro boost system to install? any info will be a be greatly appreciated, Thanks!
-
the k20 vacuum system will be OK, oh yeah welcome from maryland
-
Welcome!
-
Welcome from ND
-
why not use the hydro that came with the truck? its my understanding this system brakes way better than the vacuum boost system. i would like to go the other direction and put a hydro boost on instead of my vacuum boost system
-
Unfortunatly, I only got the rolling chassis from the cucv, (the good stuff). Thanks
-
Welcome from NW Indiana
-
Welcome to the site!
-
Your vacuum booster should work just fine.
I should also add that the vac booster will be more trouble free. I.e. no hydraulic lines to leak or get in the way.
-
Your profile appears to have a horrible picture....is that a rolled truck?
-
No roll over, Telephone pole repositioning!! 1 cord of wet red oak firewood in the back stacked over the cab, ice covered road, last load for the day, ect. ect. ect. bottom line pole-1 / K-30 -0
-
Ouch!!! Game over man! Welcome....
-
Hey man what part of rhode island you in?? I lived in coventry for 28 1/2 years before moving to florida in 2002.I know them seasons all to well in RI lol.. I`ll be home on september 2nd for a week to see family...
Welcome abord by the way..
thanks
pat
-
Foster, BUT, I still have most of my teeth! I lived in Loxahatchee FLA in 80's swamping my 78 K-10 stepside, Great fun!! Mama made us move back to RI
-
Thanks to all for the welcome, I am overseas 20 days each month based out of the Middle East flying mostly food items and supplies for the troops and it is awesome to come to this site and wind down and read for hours on end about everybodys projects. I am still figuring out how to navigate the site, but getting there. My K-30 project will be a slow going project as I only get a few days at best at home every month to work on it I figure 2 yrs to comleation or divorse and compleation in 1 or 2 months hmmmmm.
Thanks Again Everyone!
-
Are you a civilian or military pilot?
-
Abused Civilian!, in my last rodeo, I am an old flight engineer on the old clasic 747 working on my old trucks! wow did I say old 3 times in one sentance! I figure I got about 5 to 8 more years and all the flight engineers will be gone. most of my time was on the great DC-8
-
Nice i lived off of rt 117 in coventry. Right near foster so not that far from where i lived at all.. Great to see a RI`er here...
thanks
pat