73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Blazers/Jimmys => Topic started by: 84chevysilverado on August 12, 2010, 11:20:55 am

Title: going to look at a blazer need advice?
Post by: 84chevysilverado on August 12, 2010, 11:20:55 am

 ;D

Title: Re: going to look at a blazer need advice?
Post by: 84chevysilverado on August 12, 2010, 11:24:00 am

wow dont no what happened there anyway I have been on the site for a while now and restored and modified my 84swb c10. I have always loved 4wd blazers and I finally found one. Just wondering if blazers and trucks have the same bad areas for rot? or are there any other areas to look for? thanks marc P.S. I am officially addicted to square bodys lol

Title: Re: going to look at a blazer need advice?
Post by: frogman68 on August 12, 2010, 12:20:37 pm

With the rust bucket (Blazer) I am working on I say check the rear floor and tailgate support.

Title: Re: going to look at a blazer need advice?
Post by: Irish_Alley on August 12, 2010, 01:08:22 pm

I've seen them go both spots as he said tailgate support were the tailgate bolts to the bed can be fixed easy with a piece of channel and the floor more time I see it at the step up for the rear seat

Title: Re: going to look at a blazer need advice?
Post by: Captkaos on August 12, 2010, 01:35:06 pm

Same as a pickup on the front, and the rear floor pans like frogman68 said.

Title: Re: going to look at a blazer need advice?
Post by: 84chevysilverado on August 12, 2010, 03:43:15 pm

ok thanks guys gonna go look at it sat its got 180,000 km 350 350 combo 4wd its been sittin for a while but 600 bucks is all he wants for it.

Title: Re: going to look at a blazer need advice?
Post by: team39763 on August 12, 2010, 03:50:56 pm

The Blazer I just got, had rust holes throughout the section where the removable top meets the cab.  I'm not sure if that's common, but that's what was rusty on the 2 blazers I've seen in my town.

Title: Re: going to look at a blazer need advice?
Post by: 84chevysilverado on August 16, 2010, 09:14:05 am

well i went to look at it and i bought it for 500 bucks. needs rockers and drivers floor and thats it body wise that I could see right away. 350 350 combo np208 transfer case. power everything post pics when i get it home this week thanks for the tips guys

Title: Re: going to look at a blazer need advice?
Post by: jaredts on August 16, 2010, 10:16:09 am

Sounds like a great deal!