73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: kentucky steve on August 16, 2010, 10:42:05 pm

Title: Wiring harness for power locks and windows
Post by: kentucky steve on August 16, 2010, 10:42:05 pm

I am looking for a new wiring harness for the power windows and locks that I am putting in my 83 Chevy.  I understand from a little research that it just plugs into the fuse block and leads to the doors from there.  Any Ideal where I can buy one new.  I am not a big fan of junk yards for any electrical parts.  

Thanks Kentucky Steve

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on August 17, 2010, 03:35:04 pm

Power window is here:
http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=7&Product_Code=4990-10-356&Category_Code=6T

They are Electric Life kits.  I can get their power door setup also but it isn't factory setup.  I don't have their updated catalog yet.

Title: Re: Wiring harness for power locks and windows
Post by: CreativeNotice on August 17, 2010, 08:26:10 pm

What else is required? Motor etc?

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on August 18, 2010, 05:11:00 pm

required for what, converting?

Title: Re: Wiring harness for power locks and windows
Post by: SMiller on August 19, 2010, 01:52:00 pm

Yes what all is involved in swapping over to power everything. Could you use your kit and buy GM switches to have the factory look.

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on August 19, 2010, 03:39:28 pm

If you want power windows you need the switches above and this:  http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=7&Product_Code=GM01-K&Category_Code=

If you want windows and locks you need those switches and actuators also.

Title: Re: Wiring harness for power locks and windows
Post by: SMiller on August 22, 2010, 11:25:30 am

Capt, does the lock kit really come complete? Doesn't it need something to actually lock\unlock the doors or am I missing something. I have been wanting to switch my truck over to power windows\locks, looks like I jusr need the two kits and I am good to go?

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on August 23, 2010, 04:24:10 pm

I don't even know if electric has a lock kit that will fit these, they just list a kit.

Title: Re: Wiring harness for power locks and windows
Post by: SMiller on August 25, 2010, 10:22:05 pm

Since this is something you carry or can order will you look into it, if so I would order everything to do both sides of my truck.

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on August 26, 2010, 12:51:04 pm

I will check on it today.

Title: Re: Wiring harness for power locks and windows
Post by: Captkaos on September 16, 2010, 02:11:04 pm

Ok, this too WAY to long for them to respond, I finally got my rep on the line today and the 95120 will work for these trucks.

http://electric-life.com/shopexd.asp?id=869

They are $137.95 + shipping.