73-87chevytrucks.com

General Site Info => General Discussion => Topic started by: Irish_Alley on October 03, 2010, 02:17:00 am

Title: 94 door pins
Post by: Irish_Alley on October 03, 2010, 02:17:00 am

Well I went to replace my door pins on my 94 the other day due to it clunking if I hit a bump hard enough. the bottom was a piece of cake but the top the door spring is in the way and I don’t want to try to knock it out and not be able to put it back on place how are you supposed to do the top ???

Title: Re: 94 door pins
Post by: 454ss on October 03, 2010, 03:43:03 am

http://www.harborfreight.com/gm-vehicle-door-spring-tool-95344.html

Title: Re: 94 door pins
Post by: Irish_Alley on October 03, 2010, 04:20:19 am

cool thanks now to save 6 bucks and make one lol

Title: Re: 94 door pins
Post by: Blazin on October 03, 2010, 06:56:14 am

That tool is worth its weight in gold. Just don't try and compress the spring with the tool. It strips the bolt. First two I had this happened to. Then the Mac tool guy told me this. " Put the tool in the spring, then compress it with a vice, then tighten the nut up ".